Omron NT620C, Руководство по эксплуатации

Страница: 175 / 337

4-8 Section Numeral Setting
163
•
Specifying the column using the system key
When the system keys and of the touch panel, a cursor can be moved in
the order that the numeral setting input column is created by the support tool.
For example, when three numeral setting input columns are created, a cursor
can be moved in due order as follows:
key: First
!
Second
!
Third
!
First
key: First
!
Third
!
Second
!
First
When the “Numeral Setting Screen” for the screen attribute is set to “System”,
the order of movement using the system keys
and can also be changed.
For details, refer to NT-series Support Tool Operation Manual (V028-E1-
j
).
•
Specifying the column using the cursor moving key
With the cursor moving key of the touch switch being set, the numeral setting
input column can be specified only by touching the key.
Position to
be entered
is moved.
1234
5678
9012
Numeral setting
cursor moving key
Pressed
1234
5678
9012
Position to
be entered
Reference - When using Ver.2.
j
of the NT-series support tool, cursor moving keys can be
automatically created as touch switches associated with the input fields when
numeral setting input fields are created.
- The pop-up window function (“open”) can also be assigned to the cursor mov-
ing keys (if the keys are created automatically, this function can be set by modi-
fication).