Omron NT620C, Руководство по эксплуатации

Страница: 76 / 337

3-4 Section Initializing Memory
63
3-4 Initializing Memory
If the NT620S/620C is used for the first time or if the screen data is ruined and the
NT620S/620C cannot be normally started, the memory needs to be initialized.
The memory initialization is required in the cases mentioned below.
Reference - When the screen data memory is initialized, all the screen data that was stored
in the NT620S/NT620C up to that point is cleared. Check that the created
screen data is backed up in a floppy disk before initializing.
- If no system program is installed or the system program has been destroyed,
the system program must be installed. For the installation method, refer to 2-4
“Installing the System Program” (page 30).
S
The following memory data can be initialized.
Image data memory
Memory tables
Display history
The screen data can be initialized regardless of the setting for Resume Function
(see page 87).
3-4-1 Initialization of the Screen Data
The screen data can be initialized by either of the following two methods.
- Initialization by using the System Menu
- Initialization by using the DIP switch (Forced Initialization)
Initialization by using the System Menu
Initialize the image data memory by following the procedure given below.
Select “Maintenance Mode”.
SYSTEM MENU
Quit
Transmit Mode
Maintenance Mode
Expansion Mode
V0.0