Omron NT620C, Руководство по эксплуатации

Страница: 127 / 337

4-1 Section Creating and Transmitting Screen Data
115
NT620C
- NT Model : 610C (There is no “620C” setting.)
- Memory Size : 1024 KB
- Direct Access : Ver.4
Note Since the NT620S and NT620C are, from the standpoint of functions, almost
identical to the NT612G and NT610C, they do not have their own “NT Model”
setting. Make the following settings for these two models:
NT620S : “610G”
NT620C : “610C”
4-1-2 Creating Screen Data
Screen Data Creation Method
The screen data is created by using the support tool. The support tool registers
the screen data used with one NT620S/620C to one file.
Screen data can be created by one of the following three methods:
•
creating a new file;
•
editing an existing file;
•
reading and editing selected screens from an existing file.
Screen Data Creation Procedure
The following gives the basic screen data creation procedure. Required settings
and reference pages are given for each step of the procedure.
Select “Tool Settings” in the Main Menu to display the “Tool Settings” screen.
Settings of NT model, memory size, direct connection, etc. are made in this