Omron NT620C, Руководство по эксплуатации

Страница: 68 / 337

2-9 Section Connecting a Printer
55
2-8-1 Connection Method
Make the connection cable by referring to the description of the RS-232C type or
RS-422A type host link method and the connector specifications for the host to
be connected. If the host is an IBM PC/AT or compatible and the connection is
RS-232C, the support tool connection cable can be used without alteration.
For details on cables, refer to Appendix G“Method for Making the Cable for Con-
nection to the PC” (page 301).
2-8-2 Host Settings
Set the same communication conditions at the host as were set at the NT620S/
NT620C. For details on the setting method, refer to the instruction manual for the
host used.
2-9 Connecting a Printer
Hard copies of screens can be printed (printing of screen images) onto a printer
connected to the NT620S/620C.
In order to make a hard copy at a printer connected to the NT620S/620C, it is
necessary either to create a screen print key as a touch switch on the screen to
be printed during screen creation, or to issue a print instruction from the PC. For
details, see 4-7 “Touch Switches” (page 151), and 5-7 “NT620C/620C Status
Control” (page 234).
2-9-1 How to Connect
Connect the printer to the NT620S/620C with a Centronics cable. The length of
the cable should not exceed 3 meters.
Reference If the connection cable is connected or disconnected while the power of the
printer is on, the NT620S/620C may malfunction. Make sure to turn off the pow-
er of the printer before connecting or disconnecting the connection cable.
EPSON ESC/P
Color Printer (24-pin),
Monochrome Printer (24-pin)
+
24VDC GR