Omron NT620C, Руководство по эксплуатации

Страница: 83 / 337

3-5 Section Setting the Conditions of Communications with the PC by Using the Memory Switches
70
[Memory Link]
Data Bit Length 8 bits
MEMORY SWITCH MENU
Quit
Key Press Sound ON
Buzzer Sound
ON
Screen Saver None
Resume Function ON
Printer ESC/P TONE
Host Link Speed 2400 bps
Stop Bit Length 1 bit
Parity Bit Odd
Flow Control RS/CS
Response Always
S
Key Press Sound 3-8 Various System Settings (page 81)
S
Buzzer Sound 3-8 Various System Settings (page 83)
S
Screen Saver/Backlight
3-8 Various System Settings (page 85)
S
Resume Function 3-8 Various System Settings (page 87)
S
Printer 3-8 Various System Settings (page 89)
S
Comm. Method Selecting the Host Communication Method (page 70)
S
Host Link Speed Selecting the Host Link Communication Speed (page 73)
S
Unit No. Setting the unit number (page 74)
“Comm. Method” and “Host Link Speed” can only be set from the memory switch
menu called from the system menu.
In addition, the following settings can only be set from the support tool.
S
Number of numeral memory tables
Numeral Memory Tables (page 135)
S
Number of character-string memory tables
Character-String Memory Tables (page 133)
S
Alarm FIFO Alarm History Display (page 181)
3-5-1 Selecting the Host Communication Method
The NT620S/620C can be connected to a PC by the host link, NT link (1:1), NT
link (1:N) or memory link. Either link can be selected by setting the “Comm. Meth-
od” memory switch.
However, if using the memory link, install the dedicated system program using
the system installer.
Select the communication method that is supported by the connected PC.
The factory setting is not fixed.
Select the host communication method by the menu operation from the System
Menu as mentioned below.