4- programming software (INDEXWORK)
Quick reference NS600
OMRON EUROPE MAC centre
QUICK REFERENCE NS600.DOC
Pag. 18
2.-
Next step is to do a TEST RUN to check the wiring between the servodriver and servomotor and verify the
communication between the NS600 and the computer.
To do it selects “MODULE”, “TEST RUN” and then open “TOOLS” and “SERVO JOG”
On the servo jog window is possible to activate or deactivate the servo (green led indicates servo run). Also is possible to
select the jog speed and maintaining press any of the two buttons the motor will turn in forward or reverse direction.
If pressing any of this buttons the next message appear:
“Error initiating servo jog! Moving Disable Error due to P-OT”
“Error initiating servo jog! Moving Disable Error due to N-OT”
It means that P-OT, N-OT or both (CN1-42, CN1-43) inputs are active, it’s necessary to disable them by hardware or by
software in parameter Pn80C, Pn80D (option 3: movements always enable)
4.2.- WORKING WITH THE SOFTWARE
Depending on the select module is possible to operate some function or another ones. These modules are accessible by the
“MODULE MENU” or in the task bar, to view these ones go to “VIEW”, “TOOLBAR” and “MODULE”.
Parameter Editor
Edit all the parameter in the servodriver and NS600. To do it is necessary to open the edit window
(“TOOLS” and “PARAMETER EDITOR”)
NOTE: the values in blue are Selection parameters (bits) and the black ones are useful adjustments.
Grey parameter can’t be modified (fixed by NS600)
When the modification is done is necessary to use the Download function to transfer it to the servodriver and NS600
Содержание NS600
Страница 1: ...Mechatronics NS600 Quick reference...