OMRON
NS Series Quick Start Manual
Page 11
This completes the procedure required to start the PT for the first time. Now it is
possible to transfer the project data. You can exit the System Menu by pressing
the [Exit] button or you can leave it into System Menu mode.
2.5 How to use System Menu
The system menu can be displayed by pressing two of the four corners of the touch
panel simultaneously. There are many settings in the PT's System Menu. Many of
those are the same as System Settings in the NS-Designer. For more information,
please refer the NS-Series Setup Manual (V083-E1-xx) section 6.
2.6 Communication methods
All PTs have two serial ports. The NS12-TS01(B), NS10-TV01(B), NS8-TV01(B), and
NS5-SQ01(B) also have an Ethernet interface. These communications ports can be
used for the communications methods shown in the table below.
Communications
ports
Supported communications methods
Serial port A
- 1:1 NT Link
- 1:N NT Link (See note.)
- For connecting the NS-Designer or Bar Code Reader.
Serial port B
- 1:1 NT Link
- 1:N NT Link (See note.)
- For connecting the NS-Designer or Bar Code Reader.
Ethernet interface
- FINS communications
- For connecting the NS-Designer.
Note
NT Link can be set on either normal or high-speed communications.
Note
NT Link 1:N may only be configured for 1 serial port.
The following three communications methods can be used to transfer data between
the PT and NS-Designer (computer). The data can be
project data
or
system data
.
The meaning of the Systems Data in described in the Terminology chapter at the end
of this manual.
Serial communications
Screen data (project data) can be transferred by simply connecting a cable between
the computer and PT. Serial communications does not require settings such as those
used for Ethernet. The baud rate, however, is not as fast as Ethernet.
Ethernet
The speed is faster than serial transfer and screens can be transferred from a remote
location (via the network). The communications parameters must be set on the PT,
NS-Designer and FinsGateway.
Содержание NS10
Страница 1: ...NS Series Quick Start Manual ...
Страница 21: ...OMRON NS Series Quick Start Manual Page 21 ...