Omron NS10, Быстрый старт

Страница: 38 / 44

OMRON NS Series Quick Start Manual
Page 38
4. Click the [Select Project] button and select the project to be transferred (when
sending only). By the default, the selected project is the same as the project that
was edited by the NS-Designer. So, normally you don't need to select the project
data.
The list of screens stored in the selected project will be displayed in the NS-
Designer Box and PT/Memory Card Box.
5. Click [Select All] to select all the screens stored in the project as the target data to
transfer.
Click the [Select Update Screen] button to select only transfer of the screens
between the PT/Memory Card and your computer that have changed since the
last transfer. This setting is particularly useful for correcting and updating screen
data repeatedly.
6. Click the Button to send data to the PT/Memory Card from the computer,
and click the Button to send data to the computer from the PT/Memory
Card.
When uploading data, a dialog box will be displayed for specifying the destination
where the project will be saved.
7. The Confirmation Dialog Box will be displayed. Click the Start Button to start
transferring data.
5