Omron CX-MOTION-NCF - V1.9, Руководство по эксплуатации

Страница: 97 / 147

73
Axis Monitor Section 8-2
Present Position Monitor
Note When performing Unit Monitor, set the Input Memory Area of the Axis Operat-
ing Memory Area Designation in the Edit Unit Parameter Window and transfer
the setting to the Position Control Unit. If it is not set, the data in the Unit is
monitored directly, which makes the response slower.
8-2 Axis Monitor
In Axis Monitor, present values, status, external I/O, and error information of
axes are monitored.
Starting Axis Monitor (Axis Monitor Common Items, Basic Monitor, Status Monitor,
Present Value Monitor)
1,2,3... 1. In the Axis Map Setting Window, select Online - Axis Monitor , click
in the toolbar, or right-click the Position Control Unit or Servo Drive and se-
lect
Axis Monitor . If the communications between the Position Control
Unit and Servo Drive have not been established at this point, the following
dialog box will be displayed.
Item Explanation
Command value Displays the command value of each axis.
Feedback value Displays the feedback value of each axis.
Monitor all axes with
command unit If selected (i.e., checked), all the axes will be monitored using
command unit. Pulse rate and unit are set in Axis Monitor.