Omron CX-MOTION-NCF - V1.9, Руководство по эксплуатации

Страница: 63 / 147

39
Editing Servo Parameters Section 5-2
match, ORIGIN SEARCH execution will not be possible, or another mal-
function may occur. (The Using Absolute Encoder parameters are as fol-
lows: W Series (with and without built-in communications): Pn002.2, G
Series (with built-in communications): Pn00B, G5 Series (with built-in
communications): Pn00F.)
(3) When setting Reversal Mode 3 for the Origin Search Operation, Not Use
Origin Proximity cannot be set for the Origin Detection Method.
(4) When using an Absolute Encoder and the Preset When Origin Search
setting, only Reversal Mode 1 can be set for the Origin Search Operation.
Quitting Editing
Click the OK Button. Once all the editing is completed, click the OK Button to
finalize the edited data.
To cancel the edited data, click the Cancel Button.
5-2 Editing Servo Parameters
In the Axis Map Setting Window, select Edit - Edit Parameters - Axis
@@
,
double-click an axis to be edited, or right-click an axis to be edited and select
Edit Servo Parameters from the pop-up menu. (
@@
: 01 to 16) The Edit
Servo Parameter Window will be displayed.
Editing Servo Parameters
1,2,3... 1. Select a parameter to be edited.
Edit a parameter either by entering a value or by selecting a value from the
drop-down list for each bit of the parameter.
For parameters whose bits are to be set, click the
Plus Icon on the left to
display the parameters for each bit.
Item Explanation
Download Downloads Servo Parameters to a Servo Drive
Upload Uploads Servo Parameters from a Servo Drive.
Compare Compares the Servo Parameters on the computer with the ones in
the Servo Drive.
Initialize Initializes the Servo Parameters to their default settings.
OK Saves the parameters that are set in the Edit Servo Parameter
Window.
Cancel Cancels the parameters that are set in the Edit Servo Parameter
Window.