121
Allocating I/O Data
Section 5-2
Alarm Status Area
The Digital I/O Slave Unit's Alarm Status Area contains the following 16 bits.
These bits indicate serious errors in the Unit.
5-2
Allocating I/O Data
Input and output areas in I/O memory in the Master Unit are allocated to the
I/O data of Word Slave Units in a CompoNet Network. Node address areas
are allocated in order of node addresses for Slave Units of the same type. In a
CompoNet Network, Units are allocated node address areas of the size
required for each Unit, based on the node address set for the Unit.
5-2-1
Data Allocation for Word Slave Units
Word Slave Units are allocated node address areas in units of 16 points (one
word).
• Units with 8 inputs or outputs are allocated one word (the node address
set for the Unit).
• Units with 16 inputs or outputs are allocated one word (the node address
set for the Unit).
• Units with 16 I/O points (8 inputs and 8 outputs) are allocated two words
(the node address set for the Unit). The data is allocated to the lower
bytes of the words, and the upper bytes remain unused.
14
Reserved
---
15
Reserved
---
Bit
Content
Description
Bit
Content
Description
0
Reserved
---
1
EEPROM Data Error Flag
OFF: Normal
ON: Error occurred
Turns ON when there is an error in
the EEPROM data.
2
Reserved
---
3
Reserved
---
4
Reserved
---
5
Reserved
---
6
Reserved
---
7
Reserved
---
8
I/O Power Supply Status Flag 1
OFF: I/O power is ON
ON: I/O power is not ON.
Turns ON when I/O power is not
being supplied.
9
I/O Power Supply Status Flag 2
OFF: I/O power is ON
ON: I/O power is not ON.
Turns ON when I/O power is not
being supplied to the Expansion Unit.
10
Reserved
---
11
Reserved
---
12
Operation Time Configuration Flag
OFF: Normal
ON: Error
Turns ON when a threshold value is
set for the operation time monitor
function between a Digital I/O Slave
Unit and Expansion Unit if an Expan-
sion Unit is not connected.
13
Reserved
---
14
Reserved
---
15
Reserved
---
Содержание CRT1 - 10-2009
