Omron CRT1 - 10-2009, Руководство по эксплуатации

Страница: 215 / 675

191
Units with Screw Terminal Blocks
Section 5-3
Output Section Specifications
Note Please see " Appendix E: I/O Power Supply Current " regarding the I/O power
supply current supplied to the V and G terminals.
Component Names and Functions (Same for CRT1-MD16TA(-1)/CRT1-MD16TAH(-1))
Indicator Section
Communications
Indicators Refer to 4-1-3 Communications Indicators .
Item Specification
Model CRT1-MD16TA CRT1-MD16TA-1 CRT1-MD16TAH CRT1-MD16TAH-1
I/O capacity 8 outputs
Internal I/O common NPN PNP NPN PNP
Rated output current 0.5 A/output, 2 A/common
Residual voltage 1.2 V max. (0.5 A
DC, between each
output terminal
and the G termi-
nal) 1.2 V max. (0.5 A
DC, between each
output terminal
and the V terminal) 1.2 V max. (0.5 A
DC, between each
output terminal
and the G termi-
nal) 1.2 V max. (0.5 A
DC, between each
output terminal
and the V terminal)
Leakage current 0.1 mA max.
ON delay 0.5 ms max.
OFF delay 1.5 ms max.
Load short-circuit detection --- Supported.
Disconnection detection --- Operates at 3 mA/point max. (Does not
operate at over 3 mA.)
Number of circuits per common 8 outputs/common
Isolation method Photocoupler
Output indicators LED (yellow)
Power supply type Multi-power supply
Current supplied to output
devices 100 mA/points
I/O power supply current con-
sumption 15 mA max. for 24-VDC power supply voltage 35 mA max. for 24-
VDC power supply
voltage
Output handling for communica-
tions errors Select either hold or clear from CX-Integrator.
Communications
indicators:
MS and NS
Node address switches:
×
10 and
×
1 (from left)
Output indicators 0 to 7
Input indicators 0 to 7
Communications connector
I/O terminal block (removable)