Omron CRT1 - 10-2009, Руководство по эксплуатации

Страница: 434 / 675

410
Allocating I/O Data
Section 9-2
Two-point Output Units
Four-point Output Units
Two-point I/O Units
Note Upper bits indicated “not used” for two-point Output Units are unused bits.
Treat unused bits as follows:
• Unused bits in bit output area: Use 0.
• Unused bits in bit input area: 0 is input.
Four-point I/O Units
Bit Slave Units are allocated node address areas in order without leaving any
bits unused in the middle. For example, eight, two-point Slave Units are allo-
cated one word. Likewise, four, two-point Slave Units and two, four-point Slave
Units are also allocated one word.
Bit Output Area
1 0
1 0 3 2
Bit Output Area
0
0
Bit Output Area
Bit Input Area
Not used.
(See note.)
Not used.
(See note.)
Bit Input Area
1 0
Bit Output Area
1 0