Omron CRT1 - 10-2009, Руководство по эксплуатации

Страница: 451 / 675

427
Bit Slave Units with e-CON Connectors
Section 9-3
9-3-5 Four-point Input Units (IP54)
CRT1B-ID04SP/CRT1B-ID04SP-1
Input Section
Specifications
Note The current consumption is for Bit Slave Unit communications cur-
rent when all inputs are OFF, i.e., it does not include input device
current consumption. The communications power supply is also
used for the I/O power supply for sensors. Be sure to consider the
sensor current consumption and the number of sensors connected
in addition to the communications power. The power supply current
consumption is expressed by the following formula.
Communications power supply current consumption = Bit Slave
Unit communications current consu (Bit Slave Unit input
current
×
number of inputs used) + (sensor current consumption
×
number of sensors used)
Item Specification
Model CRT1B-ID04SP CRT1B-ID04SP-1
I/O capacity 4 inputs
Internal I/O common NPN PNP
ON voltage 10.5 VDC min. (between each
input terminal and the V terminal) 10.5 VDC min. (between each
input terminal and the G terminal)
OFF voltage 5 VDC max. (between each input
terminal and the V terminal) 5 VDC max. (between each input
terminal and the G terminal)
OFF current 1.0 mA max.
Input current 3.0 mA min./input (at 10.5 VDC)
Sensor power supply voltage Communications power supply voltage 0 V (max.)
Communications power supply voltage
−
1 V (min.)
ON delay 1.5 ms max.
OFF delay 1.5 ms max.
Number of circuits per common 4 inputs/common
Power short-circuit detection Supported.
Isolation method No isolation
Input indicators LEDs (yellow)
Degree of protection IEC standard IP54
Installation Screw installation (M4)
Power supply type Network power supply
Communications power supply
current consumption (See note.) 85 mA max. for 24-VDC power supply voltage
90 mA max. for 14-VDC power supply voltage
Input device supply current 80 mA/2 points
Weight 188 g