Omron CQM1H - 08-2005, Руководство по эксплуатации

Страница: 254 / 299

234
2-1 Features and Word Allocations
2-1-1 Features
•
The PID with advanced feed-forward circuitry (2 degrees of freedom) of the
CQM1-TC20
j
/TC30
j
assures stable temperature control. The Units can
also be set to ON/OFF control.
•
Temperature Control Units are available for either 4-loop temperature control
or 2-loop temperature control, and Units with 2-loop temperature control pro-
vide a heater burnout alarm. You can also select between thermocouples or
platinum resistance thermometers as the input sensors.
Inputs
Output type
NPN outputs PNP outputs
4 loops
Thermocouples CQM1-TC201 CQM1-TC202
Platinum
resistance
thermometers CQM1-TC302 CQM1-TC302
2 loops with heater Thermocouples CQM1-TC203 CQM1-TC204
burnout alarm
Platinum
resistance
thermometers CQM1-TC303 CQM1-TC304
Temperature Ranges
Thermocouples (See note.) Platinum resistance
thermometers
K (CA) K (CA) J (IC) J (IC) T (CC) L L R S B Pt100 JPt100 Pt100 JPt100 ---
T
ermperature range (degrees C)
1800
1600
1300
800
600
400
300
200
100
0
–100
–200
1300
–200
500.0
0.0
850
–100
400.0
0.0
400.0
–200.0
850
–100
400.0
0.0
1700
0
1700
0
1800
100
650.0
–200.0
650.0
–200.0
250.0
–20.0
250.0
–20.0
Do not set.
Code
No.
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 to
9
Min.
unit
1
°
C 0.1
°
C 1
°
C 0.1
°
C 0.1
°
C 1
°
C 0.1
°
C 1
°
C 0.1
°
C 0.01
°
C ---
Note K (CA) = Chromel/alumel, J (IC) = Iron/constantan, T (CC) = Copper/constan-
tan, L = Iron/constantan, R = Platinum/platinum rhodium 13%, S = Platinum/plat-
inum rhodium 10%, B = Platinum rhodium 30%/platinum rhodium 6%
2-1-2 Word Allocations
•
One word each is allocated to the Temperature Control Unit for inputs and out-
puts.
•
Commands are used to set and read data.
•
The IOTC(––) instruction can be used to simplify programming when using
CX-Programmer version 2.0 or higher and a CQM1H CPU Unit with a lot num-
ber of 0160 or later.
Temperature Control Units
Features and Word Allocations
Section 2-1