Safety instructions
7
OMICRON
1.3
Operating the measurement setup
Before operating a
Safety Accessory
, read the safety instructions in this Supplementary Sheet carefully.
Do not turn on a
Safety Accessory
and do not operate a
Safety Accessory
without understanding the safety
information in this Supplementary Sheet. If you do not understand some safety instructions, contact
OMICRON before proceeding.
Maintenance and repair of the
Safety Accessories
is only permitted by qualified experts at OMICRON
Service Centers (see "Support" on page 48).
When handling and operating any
Safety Accessory
, observe the safety instructions in the User Manual of
the main device(s) with which you use the
Safety Accessory
with and the following additional safety
instructions:
Do not drop the
Safety Accessory
. Dropping the
Safety Accessory
may impair its operation.
Do not use the
Safety Accessory
submerged in oil or water or in locations continuously subject to
splashes of oil or water.
Use the
Safety Accessory
only in a dry environment.
Always lock connectors properly.
Do not operate the
Safety Accessories
under ambient conditions that exceed the temperature and
humidity limits listed in sections 4.7, 5.7, 6.7 and 7.7.
Do not operate the
Safety Accessories
in the presence of explosives, gas or vapors.
Always test the
Safety Accessory
under actual conditions before using it, as described in the
corresponding chapter of this Supplementary Sheet.
Do not insert objects (for example screwdrivers, etc.) into any input/output connector.
Immediately place damaged or malfunctioning devices out of service.
If in doubt, contact OMICRON technical support (see "Support" on page 48).
The
Safety Accessories
are only compatible with the specified OMICRON main devices (see
chapter 2 Compatibility with OMICRON test ).
If a
Safety Accessory
does not seem to function properly for any reason, stop using it and contact
OMICRON support (see Support on page 48).
1.4
Orderly measures
The
Safety Accessories
Supplementary Sheet or alternatively the e-book must always be available on site in
which the
Safety Accessories
are operated.
The users of the
Safety Accessories
must read this Supplementary Sheet before operating the
Safety
Accessories
and observe the safety, installation, and operation instructions therein.
The
Safety Accessories
described in this Supplementary Sheet are accessories designed to increase the
safety awareness and/or safety during operation of OMICRON test systems.
The
Safety Accessories
may only be used in accordance with this Supplementary Sheet and in accordance
with the user documentation of the connected OMICRON test system main device(s) (including but not
limited to User Manuals, Reference Manuals, Getting Started manuals and manufacturer manuals). The
manufacturer and the distributor are not liable for damage resulting from improper usage.
Opening the
Safety Accessories
or their accessories without authorization invalidates all warranty claims.
Any kind of maintenance or repair on the
Safety Accessories
or their accessories may only be carried out by
persons authorized by OMICRON.
