Safety Accessories Supplementary Sheet
26
OMICRON
The following table describes the status indication of the
SAA2
system.
Table 11
:
Status indication of the
SAA2
system
Signal state
Operation condition & status
Red light
(continuous or flashing) &
Beeper OFF
Depending on test device.
Refer to the user documentation of the main device.
Red light
(continuous or flashing) &
Beeper ON
Depending on test device.
Refer to the user documentation of the main device.
Green light
(continuous)
Depending on test device.
Refer to the user documentation of the main device.
Green light
(flashing)
The
Emergency Stop
button is pressed, or the signal lamp
is not connected, or the light is defective, or the dongle is
not connected.
Green and red alternating
(switching alternatively)
The test device is not connected with the safety interface
cable to the
SAA2
control unit or the safety interface cable
is defective.
No light
Power supply defective or not connected.
Figure 10: Connecting the
SAA2
to the test system, the
SAA2
control unit power supply, a maximum of
6 x
SAA2
signal lamps and the
SAA2
dongles.
