![background image](http://html1.mh-extra.com/html/omega/om-daqlink-temp/om-daqlink-temp_user-manual_3966218068.webp)
61
The main logger configuration is performed on the Device Setup tab. Any alarm levels you wish
to configure is performed on the Alarm Setup tab.
Figure 31:
OM-DAQLINK
Device Setup tab
Comment
This is the name of the logger. It is advisable to name the logger according to the location in the
facility.
Note:
The Comment field in the software and on the logger display supports all standard
alphanumeric characters except for the following: ', ", ~, &, \
Sampling Rate
Sampling rate is one sample per second to one sample per 18 hours. However, there are
programming limitations you must be aware of when configuring the loggers. The sampling rate
will vary depending on the number and type of sensors you setup. Refer to section
4.3.4
on
page 15.
Memory State
From the drop-down menu you have the following options: