82
c. The user can also select a report according to a specific time period. Select the
User
Defined
option, choose the period and click
Generate
to manually generate the report
according to the defined parameters.
16. Use the
Units
pane to select which loggers should be included on the report itself.
a. Select the
All Units
checkbox to include all network units.
b. To include a specific selection of units, unselect the
All Units
checkbox and manually
select the checkbox for each unit.
c. The order in which the units will appear on the report can be defined according to Serial
Number by selecting
By S/N
and clicking the S/N header or manually, by selecting
Manual
and clicking the Up and Down arrows.
d. The definition of the report is now complete. Click
Save Profile
and then
Close
to exit
the Reports Profiles Manager. A report will be generated at the defined time.
5.21.2.
Report Types
Each report contains at least one Report Type, with the data displayed in table format. A
description of each Report Type parameter in the Reports Profile Manager is provided below.
Alarm Log
Parameters include sensor name, setup, alarm parameters, and setup time. In addition,
each sensor alarm value is listed according to the relevant setup. If there are other setups in
the report time frame then additional setup tables and alarm tables will be displayed.
Battery alarms will be listed after the sensor alarms.
If no alarms were recorded during the report time frame, a
No Alarm Events
message will be
displayed.
Events Log
Logs all events of each logger in the Report, as well as the time of the event. The relevant OM-
DAQLINK events are:
Setup
Run
Stop
Firmware updated, including indication of previous and updated firmware version
Unit Setup Log
Logs all the setups of the logger during the logging period
If no setups were performed during the report time frame the a
No New Setup
message will
be displayed
Unit Statistics
Displays statistics for each sensor in the report. The calculated parameters are:
Min
