Olympus OME-L200, Инструкция по эксплуатации

Страница: 23 / 80

3.1 Precautions for installation and connection
19
OME-L200 INSTRUCTION MANUAL
Ch.3
Chapter 3 Installation and Connection
Prepare this instrument and the ancillary equipment according to the purpose of use as shown in
“
 System chart” on page 55.
Also, read the instruction manual for each piece of ancillary equipment and connect this instrument
and the ancillary equipment in the order given in this chapter.
WARNING
Before use, be sure to read this chapter and prepare the ancillary equipment
optimally. Otherwise, patient or operator injury may result as well as malfunctions of
the equipment.
CAUTION
• Be sure to turn the connected surgical microscope and the ancillary equipment
OFF before proceeding to the connection work. Otherwise, equipment failure or
malfunction may result.
• Use appropriate cables only. Otherwise, equipment damage or malfunction may
result.
• Connect every cable correctly and perfectly. If a connector has a lock or click
position, connect it securely until the lock is engaged or a click feeling is obtained.
Using the equipment with incomplete connection may result in equipment damage
as well as malfunction.
• The cables should not be sharply bent, pulled, twisted, or crushed. Cable damage
may result.
• Never apply excessive force to connectors. This could damage the connectors.
• Do not block the ventilation grilles of this instrument with a cloth, etc. Otherwise,
impossibility of cooling may result in equipment failure or damage.
• Install and connect this instrument on a level surface from which the surgical
microscope will not move spontaneously and lock the brake by pushing the brake
pedal. If the base moves spontaneously during work, personnel injury may result.
• Do not install this instrument in the proximity of a source of strong electromagnetic
waves (microwave therapy equipment, shortwave therapy equipment, MRI, radio,
cellphone, etc.). Otherwise, this instrument may fail.
3.1 Precautions for installation and connection