T
ro
u
b
les
hoo
tin
g
7
7.1
Troubleshooting Guide
66
No image is displayed on
the monitor.
The switches on the rear and/or front of the
monitor are set improperly.
Set the switches properly as described in the instruction
manuals for the monitor and other ancillary equipment.
The connected equipment is set improperly.
Set the connected equipment properly as described in its
instruction manual.
This instrument is connected improperly.
Connect it properly as described in Chapter 2,
“Installation and Connection” in “INSTRUCTIONS
(BASIC)” or “INSTRUCTIONS (ADVANCED).”
The connection cable is broken.
Replace the new connected cable.
The brightness of the monitor is set improperly. Set it properly as described in the instruction manual for
the monitor.
The monitor is turned OFF.
Turn the monitor ON.
The connected equipment is turned OFF.
Turn the connected equipment ON.
This instrument is turned OFF.
Turn this instrument ON.
The menu is displayed.
Press the MENU button to close the menu display.
The system setups are inappropriate.
Set the system properly as described in the description on
the “5.8 Setup of the INPUT SETUP Menu” on page 49
or “5.4 Setup of the HDTV SETUP Menu” on page 42.
The output signal setups are inappropriate.
Set the system properly as described in the description on
the “5.9 Setup of the OUTPUT SETUP Menu” on page
51 or “5.4 Setup of the HDTV SETUP Menu” on page
42.
The switch on the rear of this instrument is set
improperly.
Set them properly as described in “3.4 Setting of the Rear
Panel” for “INSTRUCTIONS (BASIC).”
The video equipment connected between this
instrument and the connected equipment is
turned OFF.
Turn the video equipment ON.
The displayed image
remains still.
The connected equipment is set to the still
(freeze) image mode.
Release it from the still (freeze) image mode to view the
moving image.
The memory image is displayed.
Press the “SOURCE/MEMORY” button to display the
source image (see page 32).
The displayed image is
unstable.
The cables are connected improperly.
Connect it properly as described in “Chapter 2
Installation and Connection” in “INSTRUCTIONS
(BASIC)” or “Chapter 2 Installation and Connection” on
page 15 in “INSTRUCTIONS (ADVANCED).”
The connection cable is broken.
Connect it properly as described in “Chapter 2
Installation and Connection” in “INSTRUCTIONS
(BASIC)” or “Chapter 2 Installation and Connection” on
page 15 in “INSTRUCTIONS (ADVANCED).”
The sync signal is set improperly.
Set it properly as described in the description on the
“Setting “OUTPUT SYNC”” on page 51 in
“INSTRUCTIONS (ADVANCED).”
The displayed image
oscillates.
A source of strong magnetic field is present
near the monitor.
Install the monitor away from the source of strong
magnetic field.
The printed picture is
blurred.
The connected equipment is set improperly.
Set it properly as described in “3.3 Setup of the
Connected Equipment” in “INSTRUCTIONS (BASIC)”
or “3.1 Setup of Connected Equipment” on page 25 in
“INSTRUCTIONS (ADVANCED).”
The subject is moving at a high speed.
Freeze the image before capturing it.
The memory mode is set improperly.
Set it properly as described in the description on the
“Setting “MEMORY”” on page 46 in “INSTRUCTIONS
(ADVANCED).
Irregularity
Possible cause
Solution
Содержание oep-4
