Olympus oep-4, Инструкция по эксплуатации

Страница: 44 / 80

S
yst
e
m
S
e
tu
p
5
5.5 Setup of the COLOR ADJUST Menu
44
1
Press “
v
” or “
V
” to move the cursor on “AUTO
PRINT.”
Characters “AUTO PRINT” are displayed in green
when the cursor is positioned on this item.
2
Press “
b
” or “
B
” to select from among “ON,”
“OFF” and “ON&CLEAR.”
The selected setting is displayed in green on the
monitor.
CAUTION
When the new image is captured, the previous image is
overwritten, if there are images which are not printed in
the memory when the input video signal is switched and
“AUTO PRINT” is set as “OFF.” It may cause image
loss.
Capture after surely confirming whether there is any
image which is not printed.
5.5
Setup of the COLOR
ADJUST Menu
This menu is used in the adjustments of the colors and
brightness of the printed picture.
When the setup of any item is changed in the COLOR
ADJUST menu, the “TEMP” indicator is displayed on
the side of item “LOAD COLOR,” indicating that at
least one setup has been changed from the current value.
If this instrument is turned OFF while the “TEMP”
indicator is displayed, the changed setups will not be
saved. To save the changed setups, see “Setting “SAVE
COLOR”” on page 45.
To display the COLOR ADJUST menu
1
Press the MENU button to display the menu.
2
Press “
b
” or “
B
” to display the COLOR ADJUST
menu, which can be identified with characters
“COLOR ADJUST” on the top left of the monitor
(see Figure 5.4).
Figure 5.4
Setting “LOAD COLOR”
This item is used to load the color setup saved in “SAVE
COLOR” in this menu. “LOAD COLOR” can also be
set in the BASIC SETUP menu. Changing the setup of
either item affects the setups of both items.
1
Press “ v ” or “ V ” to move the cursor on “LOAD
COLOR.”
Characters “LOAD COLOR” are displayed in
green when the cursor is positioned on this item.
2
Press “ b ” or “ B ” to select from among “1,” “2,”
and “3.”
The selected setting is displayed in green on the
monitor.
ON : Prints the selected memory page when the
input video signal is switched.
Does not print, if the memory page has already been
printed or no image in the memory has been
captured.
After printing, the image in the memory page is
switched to the next page.
OFF : Does not print even when the input video
signal is switched. The memory page is neither
switched.
ON&CLEAR :
Prints the selected memory page
when the input video signal is switched.
Does not print, if the memory page has already been
printed or no image in the memory has been
captured.
After printing, the memory page is switched to the
next page and the image stored in that page is
cleared.