Olympus oep-4, Инструкция по эксплуатации

Страница: 27 / 80

In
sp
ec
ti
o
n
Be
fo
re
U
s
e
3
3.2 Setup of this Instrument
27
3.2
Setup of this
Instrument
This section explains items to be confirmed and other
setup items required to use instruments other than the
devices described in “INSTRUCTIONS (BASIC).”
For detailed information on other setup items, see
“Chapter 5 System Setup” on page 37.
Figure 3.1
1
Press the MENU button.
2
Set up and confirm n the following procedures.
3
Press the MENU button.
The LCD panel should return to the previous
display.
Table 3.2
Connected
Instrument Procedure
CV-140
CV-240
EU-M60 You can use these devices at the
factory settings.
OTV-SI 1 Press the “ B ” key until the LCD
panel shows “BASIC SETUP.”
2 Press the “ V ” key until the LCD
panel shows “INPUT SEL.”
3 Press the “ B ” key until “SVIDEO”
are displayed below “INPUT SEL.”
OTV-SP1C
OTV-SP1C-G
OTV-SX2C 1 Press the “ B ” key until the LCD
panel shows “BASIC SETUP.”
2 Press the “ V ” key until the LCD
panel shows “INPUT SEL.”
3 Press the “ B ” key until “SVIDEO”
are displayed below “INPUT SEL.”
VIDEO: Inputs the signal in
composite signal formats.
S-VIDEO: Inputs the signal in the
Y/C signal format.
COMPONENT: Inputs the signal
in the component signal format.
Cursor keys
“
v ” “ V ” “ b ” “ B ”
LCD panel LOAD USER button
MENU button
EU-C60 1 Press the “
B
” key until the LCD
panel shows “BASIC SETUP.”
2
Press the “
V
” key until the LCD
panel shows “INPUT SEL.”
3
Press the “
B
” key until uppercase
letters “VIDEO” are displayed
below “INPUT SEL.”
Table 3.2
Connected
Instrument Procedure