manualshive.com logo in svg

Olympus IPLEX NX IV9000N, Инструкция по эксплуатации

Поделиться
Скачать
Olympus IPLEX NX IV9000N Скачать руководство пользователя страница 85

77

IPLEX NX

 

· When securing the stereo optical adapter to the distal end, do not use tools or 

tighten with excessive force.

 

· Make sure that the stereo optical adapter is attached properly, is not loose, and 

is free from dirt and dust particles.

 

· If the attached stereo optical adapter rattles or is loose, or even though it 

does not rattle or is not loose, if it is not firmly attached completely by rotating 
in the direction of arrow A shown in the picture, the measurement accuracy 
deteriorates.

 

· After the stereo optical adapter is attached, if the distal end is handled by 

grasping the stereo optical adapter, it may turn in the opposite direction of arrow 
A in the picture even though the nut is tightened securely. This could result 
in deteriorating the measurement accuracy. When handling the distal end, do 
not hold it by the stereo optical adapter, but always grasp the insertion tube. 
However, do not hold it by the angulation section.

 

· When the distal end of the insertion tube is subjected to a large extraneous 

force or vibration, the stereo optical adapter installation may be jolted, loosened 
or turned. Even if you leave the stereo optical adapter attached to the insertion 
tube, always check the installation condition before inserting the insertion tube 
into the observation measurement area.

NOTE

See also “3-15  Pre-operation/post-operation inspections” (page 42) for more information on 
attaching stereo optical adapters.

Make sure that the O-ring in the distal end is properly attached.

See “3-5  Attaching and removing the optical adapter” (page 30) for information on how 
to check the O-ring.

Attach the adapter so that there is no movement of the stereo optical adapter main 
body. Rotate the stereo optical adapter in the direction of the arrow A shown in the 
figure. Keep the stereo optical adapter rotated completely and turn the nut of the 
stereo optical adapter in the direction of the arrow B shown in the figure until it is tight.

1

2

Insertion tube

Nut

Stereo optical adapter main body

B

A

6-2  Attaching the stereo optical adapter

Содержание IPLEX NX IV9000N





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды