manualshive.com logo in svg

Olympus IPLEX NX IV9000N, Инструкция по эксплуатации

Поделиться
Скачать
Olympus IPLEX NX IV9000N Скачать руководство пользователя страница 10

2

 Safety precautions  - General safety precautions -

Safety precautions

Comply strictly with the precautions described below when handling this instrument. The 
information is supplemented by dangers, warnings and cautions given in each chapter. The 
safety cannot be ensured when the instrument is used in ways that are not specifically described.

 

· Never use the instrument for observing inside of the human or animal cavity.

Otherwise, death or serious injury of the person or animal may result.

 

· Never use the instrument in the following environments.

 - Where flammable atmospheres are present

 - Where metal dust or other dust is present

Otherwise, an explosion or fire may result.

 

· Do not repair, disassemble or remodel the instrument.

Never repair, disassemble or remodel the instrument. Otherwise, the injury of 

human bodies or the damage of the instrument may result. Only personnel 

who are authorized by Olympus are allowed to repair the instrument. 

Olympus is not liable for any accidents or instrument damage that occurs as a 

result of repairs attempted by personnel who are not authorized by Olympus.

 

· Stop using the instrument immediately at the first sign of heat, 

smoke, abnormal odor, abnormal noise or any other abnormality.

Even if the instrument is still operable, turn OFF the power.

 

· Do not insert the insertion tube into an inspection object that is in 

operation or conducting electricity.

Otherwise, the insertion tube may be damaged by being caught inside 

of the inspection object, etc., or the insertion tube may touch the object, 

which results in electric shock.

DANGER

WARNING

Note that use of this instrument in ways that are not specifically described in this instruction 
manual does not ensure the safety and it may also cause the malfunction of this instrument. 
Be sure to follow this instruction manual when using this instrument.

The following symbols are used throughout this instruction manual.

DANGER

 :  Indicates an imminently hazardous situation which, if not avoided, 

will result in death, serious injury or damage of observation object. 

WARNING

 :  Indicates a potentially hazardous situation which, if not avoided, 

could result in death, serious injury or damage of observation object. 

CAUTION

 :  Indicates a potentially hazardous situation which, if not avoided, 

may result in minor or moderate injury. It may also be used to alert 
against unsafe practices or potential material damage. 

NOTE

 :  Indicates a potential situation which, if not avoided, may result in 

failure of this instrument. 

TIP

 :  Indicates additional helpful information.

Содержание IPLEX NX IV9000N





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды