Olympus IPLEX NX IV9000N, Инструкция по эксплуатации

Страница: 15 / 124

7
IPLEX NX
Comply strictly with the precautions described below when handling the hook assembly.
Before use, thoroughly read the inspection manual for the inspection object to fully understand
the information contained in them, and observe their instructions during use.
When replacing the hook:
· Do not reuse the hook removed from the spring shaft.
Otherwise, the hook may fall off.
· As the hole in the hook is not threaded, it may be hard to screw the
hook into the spring shaft. However, keep screwing the hook until it
contacts the hook butting position in the spring shaft.
Otherwise, the hook may fall off.
· Do not screw the hook furthermore after the hook contacts the hook
butting position in the spring shaft.
Otherwise, the hook and the screw thread of the spring shaft may be
damaged. Also, the hook may fall off.
· Once the hook is attached to the spring shaft, do not loosen the
hook.
Otherwise, the hook may fall off.
· If you loosened the hook, remove that hook and replace it with a new
hook.
Otherwise, the hook may fall off.
· If you cannot screw the hook or if the hook falls off extremely easily,
replace the hook assembly with a spare hook assembly.
Otherwise, the hook may fall off.
When inserting the hook assembly into the channel of the scope unit
and when using the hook assembly:
· Keep your face away from the ends of the hook assembly.
Your eyes may be poked by the ends of the hook assembly.
· Do not insert any tool that is not specified by Olympus into the
channel.
The tool may not be pulled out or the loose parts of the tool may fall off.
· Attach the safety cap to the proximal end of the hook assembly
before using the scope unit.
Your eyes may be poked by the proximal end of the hook assembly.
· Use the hook assembly only for the portion described necessary in
the inspection manual for the inspection object in compliance with
descriptions in the inspection manual for the inspection object.
Otherwise, the failure such that the hook may fall off and drop on the
inspection object to damage the inspection object, etc. may result.
WARNING
Safety precautions - Hook assembly precautions -