Olympus IPLEX NX IV9000N, Инструкция по эксплуатации

Страница: 12 / 124

4
· Note the following precautions when handling the distal end of the
insertion tube.
- Do not drop the optical adapter or subject it to strong impact.
- Do not subject the distal end to severe impact or pulling.
- Do not subject the angulation section to strong pressure or bending.
- Do not move with holding the distal end of the insertion tube.
- Do not use this instrument if the O-ring of the distal end of the
insertion tube is damaged or torn.
Otherwise, the glass lenses and the precision components which
constitute the distal end and the angulation section may be damaged.
· Always attach the optical adapter before using this instrument.
If you use the instrument without attaching the optical adapter to the
insertion tube, parts (screws, etc.) are easily deformed due to contact
with hard objects, etc. If the insertion tube parts are deformed, the optical
adapter cannot be attached or may fall off.
· Never use the optical adapter if any of its parts are loose.
Otherwise, the loose parts may fall off.
· If the optical adapter cannot be attached or removed because the
nut does not rotate, stop using it.
Contact Olympus.
· If you sense any abnormality while performing the angulation
operation, do not attempt to force the angulation operation.
Otherwise, the insertion tube or the inspection object may be damaged.
· When hanging the main unit on your shoulder using the shoulder
strap, do not allow it to be caught on other objects.
Be careful so that it does not strangle your neck.
· Do not allow metal or other foreign objects to enter the main unit
through connector terminals or any other openings.
Otherwise, the malfunction or electric shock may result.
· Do not use this instrument near the strong electromagnetic radiation source.
The proper operations may be interfered. Check the electromagnetic
environment before using this instrument.
· The interfaces in the connector cover, SDHC card and USB flash drive
are high sensitivity parts. Be sure to remove the electricity before use.
Otherwise, the malfunction may occur due to the static electricity.
(Caution plate position: “  Caution 2" on page 10)
· Remove the electricity around the heat sink of the main unit before operation.
Otherwise, the malfunction may occur due to the static electricity.
(Caution plate position: “

Caution 5", “

Caution 7", “

Caution 8” and
“  Caution 9" on page 10)
· Do not use the parts other than the insertion tube underwater or
clean them under running water.
Otherwise, water creates the risk of electric shock. The parts other than
the insertion tube are designed for water proof construction only if the
battery cover and connector covers are closed completely. Do not use or
store the instrument in an environment where it is submerged in water.
CAUTION