manualshive.com logo in svg

Olympus IPLEX NX IV9000N, Инструкция по эксплуатации

Поделиться
Скачать
Olympus IPLEX NX IV9000N Скачать руководство пользователя страница 65

57

IPLEX NX

Select the strings in the preset title list registered in advance.

5

After the still image is recorded, the movie recording confirmation dialog appears.

Select <YES>.

The recording of the movie and the sound start. The red circle icon blinks on the LCD 
monitor while the movie recording is in progress. If you select <NO> in the movie recording 
confirmation dialog, only the still image is recorded and the movie is not recorded. If you 
select <CONTINUE> in the movie recording confirmation dialog, the movie is added to the 
movie that was recorded last and is recorded. For details, refer to “4 Appending the movie”.

Press the [RECORD] button to exit the movie recording.

The blinking of the red circle icon disappears when the movie recording is complete.

·

If <OFF> is set in the <FILE NAME MARK> menu, Step 3 to 5 is skipped.

·

Never attempt to insert or remove the SDHC card while the data recording is in 
progress. Otherwise, the recording stops and an error message appears on the 
display.

·

The movie recording stops automatically whenever the SDHC card becomes full or 
when the file size reaches 4 GB. An empty 4 GB SDHC card has enough capacity to 
record approximately 90 minutes.

6
7

8

TIP

You can append the movie to the movie that was recorded last.

Selecting <CONTINUE> in the movie recording confirmation dialog enables to add the movie 
to the movie that was recorded last. If the SDHC card is inserted or removed, or the [VIEW] 
button or the [THUMBNAIL] button is tapped, or the folder is changed between the image 
recording folder and the playback folder, <CONTINUE> cannot be selected.

4

 Appending the movie

Содержание IPLEX NX IV9000N





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды