Olympus IPLEX NX IV9000N Скачать руководство пользователя страница 11

Страница: 11 / 124

IPLEX NX

· Before storing the instrument in its carrying case, be sure to turn OFF

the power and remove the battery.

Leaving the battery loaded during storage causes it to be hot, which may

cause fire.

· Do not use the instrument in any environment (including strongly

radioactive environments) other than the specified operating

environment.

Otherwise, unexpected accidents that may damage the insertion tube

may result.

· Do not touch the distal end immediately after using this instrument in

high-temperature environments.

Otherwise, you may get burned.

· Use the stereo optical adapter and the scope unit in combination

specified by Olympus.

If you use them in combination that is not specified by Olympus, the

unexpected accidents that may deteriorate the performance may result.

· Note the following precautions when the illumination is turned ON.

- Do not leave the distal end of the insertion tube near the flammable

substances for a long time.

- Do not look directly at the light emitted from the distal end.

· Use only the power cord and the AC adapter specified by Olympus

and connect the power cord to the 3P power outlet within the rated

range.

Otherwise, smoke, fire, or electric shock may occur.

· Do not use the power cord specified for this instrument for other

products.

· Do not use the AC adapter outdoors.

Otherwise, electric shock, smoke or fire may occur, which may cause

damage to the instrument.

The AC adapter is designed for indoor use.

· Do not apply a strong impact to the AC adapter by hitting it against

the wall or dropping it to the floor, etc.

Otherwise, malfunction or damage may be caused and result in electric

shock.

· If you sense any abnormality while inserting the insertion tube into

the inspection object, do not attempt to insert it forcibly any more but

carefully pull out the insertion tube.

Note the following when pulling out the insertion tube.

- Do not pull out the insertion tube from the inspection object while the

angulation is locked or while the angulation section is bent.

- If the insertion tube is caught on something during pulling it out, rotate

the insertion tube gently while continuing to pull out.

WARNING

CAUTION

Содержание IPLEX NX IV9000N





























































































































Результаты поиска

Содержание IPLEX NX IV9000N

Отзывы:

Бренды по названию

Популярные бренды

Olympus IPLEX NX IV9000N, Инструкция по эксплуатации

Результаты поиска

Содержание IPLEX NX IV9000N

Отзывы:

Бренды по названию

Популярные бренды