manualshive.com logo in svg

Olympus IPLEX NX IV9000N, Инструкция по эксплуатации

Поделиться
Скачать
Olympus IPLEX NX IV9000N Скачать руководство пользователя страница 109

101

IPLEX NX

Dirt or water droplets on the objective lens of the distal end

Grasping the rigid portion of the distal end, use a clean, soft piece of gauze or a cotton swab 
to wipe off the dirt or water droplets.
You could also use the brush to brush away dirt and water droplets.
Best results may be obtained by using a commercially available absolute ethanol or isopropyl 
alcohol.

Build up of dirt on the optical adapter positioning groove or screw threads of the distal end

Use the brush provided with the cleaning kit to brush away built up dirt.
Note that insufficient cleaning may result in a loss of water tightness between the optical adapter 
and the distal end.

Dirt or water droplets on the outer surface of the optical adapter or objective lens in the 
optical adapter

Use a piece of clean, soft gauze or cotton swab to wipe off dirt and water. You could also use 
the brush to brush away dirt and water.

Cleaning dirt from the optical adapter outer surface while it is attached to the distal end

Grasping the rigid portion of the distal end, wipe the optical adapter. Best results may be 
obtained by using a commercially available absolute ethanol or isopropyl alcohol.

Dirt on the threads of screws of the optical adapter

Moisten a cotton swab with a commercially available absolute 
ethanol or isopropyl alcohol, and keep cleaning in the sequence 

,  ,   as shown in the picture on the right until no dirt is left on 

the cotton swab. Spin the cotton swab while cleaning.
Also, for thorough cleaning, turn the optical adapter while doing 

 and  .

Do not clean the optical adapter under running water. Otherwise, the optical 
adapter may be damaged.

NOTE

2

  Cleaning the distal end

3

  Cleaning the optical adapter

Содержание IPLEX NX IV9000N





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды