manualshive.com logo in svg

Olympus IPLEX NX IV9000N, Инструкция по эксплуатации

Поделиться
Скачать
Olympus IPLEX NX IV9000N Скачать руководство пользователя страница 104

96

Message

Cause and recommended action

<NO RECORDING MEDIA.>

The SDHC card or the USB flash drive is not loaded.

 

→

 Load the SDHC card or the USB flash drive you use and try 
again. Or turn OFF the instrument and ON again.

<RECORDING MEDIA FULL.>

The SDHC card or the USB flash drive is full.

 

→

 Delete the unnecessary data to free up space, or replace 
with a new SDHC card or a new USB flash drive.

<THIS IMAGE CANNOT BE RETRIEVED.>

The image is not recorded with this instrument.

 

→

 

Only images recorded with this instrument can be 
displayed.

<RECORDING MEDIA ERROR.
PLEASE FORMAT THE RECORDING MEDIA.>

The format of the SDHC card or the USB flash drive cannot 
be recognized.

 

→

 Format the SDHC card or the SB flash drive with this 
instrument.

<THE SPECIFIED FILE NAME ALREADY 
EXISTS.
PLEASE CHOOSE ANOTHER NAME.>

The file name exists.

 

→

 Specify the file name other than the existing file name.

<THE SPECIFIED FOLDER NAME ALREADY 
EXISTS.
PLEASE CHOOSE ANOTHER NAME.>

The folder name exists.

 

→

 Specify the folder name other than the existing folder name.

<RECORDING MEDIA IS LOCKED. PLEASE 
UNLOCK.>

The SDHC card is locked.

 

→

 Unlock the SDHC card you will use and insert the SDHC 
card in this instrument.

<INCOMPARABLE IMAGE RESOLUTION.>

The resolution of the live image is different from that of the 
played back image.

 

→

 Specify the file with the same resolution as the live image.

<The image cannot be displayed in 3D view. 
Acquire the stereo image again.>

The image is  not appropriate for 3D view.

 

→

Acquire the stereo image again.

<OVER CURRENT (USB).
PLEASE TURN OFF THE POWER.>

The recommended USB flash drive is not used.

 

→

 Stop inspection, and turn OFF the instrument and ON again.  
Use the recommended USB flash drive.

A USB device other than the USB flash drive is connected.

 

→

Disconnect all USB devices other than the USB flash drive.

88

 Troubleshooting

Inspect the instrument as described in “3 Pre-operation preparation and inspection” (page 22). 
If there are any obvious malfunctions, do not use the instrument and contact Olympus for 
repairs. If a slightest irregularity is suspected, do not use the instrument and perform the actions 
described in “8-1  Troubleshooting guide”. If the problem cannot be resolved by taking the 
remedial action described, stop using the instrument and contact Olympus for repair.

8-1  Troubleshooting guide

1

  Error messages

Содержание IPLEX NX IV9000N





























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды