IPLEX GAir
1.
Insert the distal end of the insertion tube into the distal end holder
(A)
(loop of the
rubber band) on the spool gently until it touches the end.
NOTE:
Do not insert the distal end of the insertion tube into the distal end holder with excess
force.
Otherwise, the angulation section may be damaged.
2.
Wrap the insertion tube around the spool.
NOTE:
l
Make sure that the insertion tube is not twisted before wrapping the insertion tube
around the spool.
l
Wrap the insertion tube around the spool evenly.
3.
Loosen the clamping screws (2 positions)
(B)
of the scope unit main body using the
coin, etc., and remove the scope unit main body from the drum unit.
139
Содержание IPLEX GAir IV9000GA
Страница 2: ......
