Olympus IPLEX GAir IV9000GA, Инструкция по эксплуатации

Страница: 12 / 157

CAUTION:
If abnormality is found in the observation image, stop using immediately and pull out the
insertion tube from the inspection object carefully.
If the optical adapter is about to fall off from the distal end of the insertion tube while inserting
the insertion tube into the inspection object, the illumination turns OFF. (The LED icon (
/ ) of
the LCD monitor is hidden.)
If the guide head is about to fall off from the distal end of the insertion tube while inserting the
insertion tube into the inspection object, a part of the view may be lost.
Continued use in this condition may cause the optical adapter or the guide head to fall off from
the distal end of the insertion tube. In this case, pull out the insertion tube carefully from the
inspection object and attach the optical adapter or the guide head firmly again according to
"Attaching and removing the optical adapter" (page 54) or "Attaching and removing the guide
head" (page 57).
If you sense any abnormality while performing the angulation operation, do not attempt to
force the angulation operation.
Otherwise, the insertion tube or the inspection object may be damaged.
Do not allow metal or other foreign objects to enter the product through connector
terminals or any other openings.
Otherwise, the malfunction or electric shock may result.
Do not use the parts other than the insertion tube underwater, clean them under running
water or splash water on them.
Otherwise, water creates the risk of electric shock. Do not use or store the instrument in an
environment where it is submerged in water.
The remote control unit is a high-sensitivity parts. Discharge it before use.
Otherwise, the malfunction may be caused due to static electricity, etc.
(Caution plate position: See "Caution" on page 18)
6