Date
9/7/2018
File
BSR-2114/MAR
Document Number
921211401_09_002
Page
67 από 74
67
Figure 5-16
Group configuration
If we want to place a zone in a group place the cursor
«^»
under the zone using the «LEFT» and «RIGHT» and then press the
«UP» key to insert the zone into the group. After that an asterix is shown over the cursor.
While exiting press
«ENTER»
to store the setting or
«ESC»
to cancel.
5.5
System menu
5.5.1
Automatic Point detection
This menu permits us to automatically search for loops and points that are connected to the panel.
As shown in the figure below, the screen shows which point is been searched, how many points have been found and which
was the last one that was found.
