Date
9/7/2018
File
BSR-2114/MAR
Document Number
921211401_09_002
Page
34 από 74
34
As observed, there are 5 basic menu categories as shown in the diagram of figure 4-4.
MENU
USER
TECHNICIAN
DATA
INFO
EVENTS
Figure 4-3
Menu diagram
In detail the menu contains:
USER
: This menu contains all options that are available to the user that has access to access level 2.
TECHNICIAN
: Only the technician has access to this level where panel programming can be done.
EVENTS
: In this menu we can see all the events of the panel.
DATA
: Contains functions used for receiving and sending data to a PC.
INFO
: This menu contains information about the system that can be accessable by any user.
To select a menu, navigate to the menu using the keys
«LEFT»
and
«RIGHT»
and press the
«ENTER»
key.
We will continue in detail of all the submenus except the Technical menu which will be covered in the next section.
4.1
Access Codes
No code is needed in order to access the function in level ‘1’.
A code is needed to access the functions in level 2. The use of an access code was though essential because in this level there
are many functions that are used to control the panel during an alarm or fault condition.
The code for access level 2 is
4.2
User Menu
If we select the user menu and press
«ΕΝΤΕR»
then a requester screen will be shown for code entry. Input the code for
access level ‘2’.
ACCESS CODE FOR LEVEL ‘2’
ACCESS LEVEL 2
1111
