Date
9/7/2018
File
BSR-2114/MAR
Document Number
921211401_09_002
Page
62 από 74
62
Figure 5-10
Selecting the type of point
This screen shows all the types of points that can be installed. ( Note- The ---- denote that the point is not available). Select
the required type by using the
«DOWN»
and
«UP»
keys and then press
«ENTER»
to confirm the selection.
The screen that opens when we want to change the name of the point has the following image.
Figure 5-11
Changing the name of a point
The cursor is shows as a
«^»
and if we want to change any letter use the «LEFT» and «RIGHT» to place the cursors under the
letter and then press the «UP» or «DOWN» keys until the desired letter is shown.
To accept the changes press the
«ENTER»
key. To cancel the operations press the
«ESC»
key.
