Date
9/7/2018
File
BSR-2114/MAR
Document Number
921211401_09_002
Page
45 από 74
45
CURRENT EVENTS
ALARM EVENTS
If we press the ENTER key we can see all current alarm events if available.
Using the UP and DOWN keys we can navigate through the events. Pressing the
ESC key exits this menu and goes to the previous.
CURRENT EVENTS
PREALARM EVENTS
If we press the ENTER key we can see all current pre-alarm events if available.
Using the UP and DOWN keys we can navigate through the events. Pressing the
ESC key exits this menu and goes to the previous.
RECORDED EVENTS
FAULT EVENTS
If we press the ENTER key we can see all stored fault events if available. Using
the UP and DOWN keys we can navigate through the events. Pressing the ESC
key exits this menu and goes to the previous.
RECORDED EVENTS
ALARM EVENTS
If we press the ENTER key we can see all stored alarm events if available. Using
the UP and DOWN keys we can navigate through the events Pressing the ESC key
exits this menu and goes to the previous.
RECORDED EVENTS
PREALARM EVENTS
If we press the ENTER key we can see all stored pre-alarm events if available.
Using the UP and DOWN keys we ca navigate through the events Pressing the
ESC key exits this menu and goes to the previous.
SHOW ALARMS IN ZONES
UNDER TEST
If we press the ENTER key we can see all alarms events in test zones if
available. Using the UP and DOWN keys we can navigate through the events.
Pressing the ESC key exits this menu and goes to the previous.
SHOW ALARMS IN ZONES
UNDER TEST
If we press the ENTER key we can see all faults events in test zones if available.
Using the UP and DOWN keys we can navigate through the events. Pressing the
ESC key exits this menu and goes to the previous.
SHOW ALARM COUNTER
If we press the ENTER key we can see the numer of alarm counter. Pressing the
ESC key exits this menu and goes to the previous.
CLEAR EVENT HISTORY
This selection deletes the history buffer of current and stored events. This
option is available to only specialized personnel. When the ENTER key is
pressed then a code entry requester pops up. Here we have to enter the code
for access level 3.
After this procedure the file is deleted and a system reset is conducted.
NOTE: This action should be made only by a technician.
After selecting to view a type of event, a screen that is identical to the one below will appear.
ENTER CODE
----
