Outdoor Living Today www.outdoorlivingtoday.com [email protected]
Page 10
18.
The Wall Panel framing will sit flush at the end of the plywood floor while the wall siding and
Corner Post will overhang the floor by approximately 1/2”.
Wall framing flush with floor.
Wall Siding overhangs floor by 1/2”
Floor
19.
Position Rear Wall Panels in place. Butt both vertical wall studs of rear walls together and attach
with
3 - 2 1/2” Screws.
Screw at the bottom, middle and top of stud to secure properly. Complete both
rear walls. Lift and position a Corner Post to end of outside rear wall panel.
20.
Position and secure Corner Post to rear wall stud as per
Step 16.
Post will
overhang
floor by 1/2”
