Outdoor Living Today www.outdoorlivingtoday.com [email protected]
Page 14
30.
Position and attach the
Door Header
to Door Jamb and Narrow Wall Panel top framing. Header
should sit flush with Door Jamb and Outside of Narrow Wall Panel Siding. Attach with
4 - 2 1/2” Screws.
Important:
Before attaching Door Header, make sure opening is exactly
49 3/4
"
across the top of doorway, and the same when screwing walls to floor (49 3/4" across the bottom
(
Step 39
). This will ensure an accurate opening for door installation. Use Threshold Doorstop as
spacer template to also confirm doorway opening.
31.
Locate 2x3
Rear Wall Plates
(55 1/2” long with 45 degree cut at 1 end). Position in rear corner
and secure each plate with
4 - 2 1/2 Screws.
Wall plate is
flush to inside
of wall framing.
32.
Position and attach remaining Rear Wall Plates as per
Step 31.
Screw into Jamb
Gap to front. Cleat to top.
