Outdoor Living Today www.outdoorlivingtoday.com [email protected]
Page 16
C. Rafter Section
View of all parts necessary to complete the Rafter Section. Identify all parts prior to starting.
Core Block
3 1/2” diameter x 8” high
(1” Alignment Mark to top)
Hip Rafters with Cleats (3)
(90 9/16” long / 22.5 Degree cut)
90° Metal Brackets
(26)
Front Mid Rafter
- 53 1/4” long
(40 degree cut each end)
Front Hip Rafters with Cleats
(2) 68 3/8” long. Left and Right
Sides are different. See Steps
48 & 49 for detail view of each
Rafter.
Rear Mid Rafter (2)
- 68” long
(30 degree cut each end)
Corner Rafter- Left (3)
(30 degree cut 1 end - 45 &
30 degree cut on other end)
Corner Rafter- Right (3)
(30 degree cut 1 end - 45 &
30 degree cut on other end)
36.
Locate
Hip Rafters with Cleats
(90 9/16” long) and
Core Block.
On the ground, angle screw
end of Hip Rafter to Core Block with
1 - 3” Long Screw.
Drill 1/8” diameter pilot hole in rafter to
prevent splitting.
Mark Block 1” from
top to align rafters.
Seat Cut
Core Block
Front Soffits (2)
(39”long)
Front Facia
(85 3/4”long)
Side Facia (2)
(59 3/4”long )
Rear Side Facia (4)
(60” long)
Side/Rear Soffits (12)
(28” long)
Important:
Pilot
Hole Rafter to
prevent splitting!
