OLS 2800000, Руководство оператора

Страница: 44 / 70

CERO_Operators Guide_Version 2018-12_01
44
6.3 Installation Procedure pH-Reader
ATTENTION
Always wear required personal protection equipment.
1. Remove Reader Blanks (optional).
□ Open the Sliding Top Cover.
□ Switch off the CERO and disconnect the power cable.
□ Remove the Front Cover (see chapter 7.3).
□ Loosen the thumb-screw (A) and remove the Reader Blanks (Figure 31).
Figure 31: Removal Reader Blanks
ATTENTION
Avoid contact with the Reader connectors. Touching the connectors may
cause an electric short and damage the Reader.
2. Mount the Reader.
□ Install the photometer mounting screw (Figure 32).
Figure 32: Installation Photometer-Mounting Screw