Olivetti d-Color MF920, Руководство по эксплуатации

Страница: 42 / 248

Choose To
On Reduce printer noise.
•
You may notice a reduction in processing speed.
•
Printer engine motors do not start until a job is ready to
print. You may notice a short delay before the first page
is printed.
•
Fans run at a reduced speed or are turned off.
•
If your printer has faxing capability, fax sounds are
reduced or disabled, including those made by the fax
speaker and ringer.
Off Use factory default settings. This setting supports the
performance specifications for your printer.
To select a Quiet Mode setting:
1
From the printer control panel, press .
2
Press the arrow buttons until
Settings
appears, and then press .
3
Press the arrow buttons until
General Settings
appears, and then press .
4
Press the arrow buttons until
Quiet Mode
appears, and then press .
5
Select the setting you want, and then press .
Submitting changes
appears.
Adjusting Power Saver
1
Make sure the printer is on and
Ready
appears.
2
From the printer control panel, press .
3
Press the arrow buttons until
Settings
appears, and then press .
4
Press the arrow buttons until
General Settings
appears, and then press .
5
Press the arrow buttons until
Timeout
appears, and then press .
6
Press the arrow buttons until
Power Saver
appears, and then press .
7
Press the arrow buttons to enter the number of minutes for the printer to wait before entering the Power Saver
mode. Available settings range from 1–240 minutes.
8
Press .
Submitting changes
appears.
9
Press , and then press until
Ready
appears.
Minimizing your printer's environmental impact
42