Olivetti d-Color MF920, Руководство по эксплуатации

Страница: 210 / 248

C
HECK THE RING COUNT DELAY SETTINGS
The ring count delay sets the number of times the phone line rings before the printer answers. If you have extension
phones on the same line as the printer, or subscribe to the telephone company's Distinctive Ring service, then
keep the Ring Delay setting at 4.
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address
in the TCP/IP section.
2
Click Settings .
3
Click Fax Settings .
4
Click Analog Fax Setup .
5
In the Rings to Answer box, enter the number of times you want the phone to ring before answering.
6
Click Submit .
T
HE TONER MAY BE LOW
88 <color> toner low
appears when the toner is low.
Can receive but not send faxes
These are possible solutions. Try one or more of the following:
M
AKE SURE THE PRINTER IS IN
F
AX MODE
From the printer control panel, press the Fax button to put the printer in Fax mode.
M
AKE SURE THE DOCUMENT IS LOADED PROPERLY
Load the original document faceup, short edge first into the ADF or facedown on the scanner glass in the upper
left corner.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
M
AKE SURE THE SHORTCUT NUMBER IS SET UP PROPERLY
• Check to make sure the shortcut number has been programmed for the number that you want to dial.
•
As an alternative, dial the telephone number manually.
Troubleshooting
210