Olivetti 3D S2, Руководство по обслуживанию

Страница: 94 / 112

6-2 Service Manual Y118040-3
The sequence of operations to perform for loading the firmware is described below.
1. La
unch the IDE Arduino software “arduino-1.6.8-windows”. The screens shown in the figures below,
captured from the PC screen, show the sequence of installation operations.
Figure 6-2 Figure 6-3 Figure 6-4
Figure 6-5 Figure 6-6 Figure 6-7
1. The screens captured and illustrated from this step onwards refer to installation of the U8glib library, used
for managing the printer display.
2. Launch the IDE Arduino software and select in sequence the menus Sketch then include library and
lastly
Add library from .ZIP file …
(Figure 6-8)
3. Search for the file
U8glib.ZIP and click on Open (Figure 6-9).