Olivetti 3D S2, Руководство по обслуживанию

Страница: 14 / 112

1-8 Service Manual Y118040-3
Label positions and meanings
On the front top part of the printer the following labels can be seen displayed. The meaning of these symbols is
given in the table below.
Figure 1-8 Labels on front of printer
SYMBOL COLOUR WARNING MEANING
TRIANGLE YELLOW DANGER HOT SURFACES
CIRCLE BLUE REGULATIONS APPLY READ INSTRUCTIONS
CIRCLE BLUE REGULATIONS APPLY USE GLOVES
BARRED CIRCLE RED PROHIBITED DO NOT REMOVE GUARDS
Inside the printer, on the safety sensitive mat, the following labels are displayed. For the meaning of these
symbols see the table below.
Figure 1-9 Internal labels on lower side
SYMBOL COLOUR WARNING MEANING
TRIANGLE YELLOW DANGER CRUSHING
TRIANGLE YELLOW DANGER MOVING PARTS
At the back of the printer, near the on/off switch, the following label is displayed. See the table below for its
meaning.
Figure 1-10 Label on external switch on printer rear
SYMBOL COLOUR WARNING MEANING
TRIANGLE YELLOW DANGER HIGH VOLTAGE
The following label is displayed on the printing plate glass and on the extruder block. For the meaning of this
symbol see the table below.
Figure 1-11 Label on internal heated plate
SYMBOL COLOUR WARNING MEANING
TRIANGLE YELLOW DANGER HOT SURFACE