Olivetti 3D S2, Руководство по обслуживанию

Страница: 3 / 112

Y118040-3 Service Manual iii
PREFACE
This document is intended to be used by technicians responsible for installing and servicing the Olivetti 3D S2 printer.
The aim of the manual is to supply all the information necessary for installing and maintaining the product
correctly
.
CONTENTS
This manual comprises of 7 Chapters and an Appendix:

Chapter 1
– Provides a general introduction to the Olivetti 3D S2 printer

Chapter 2
– Provides an illustrated description of the printed circuit boards

Chapter 3
– Provides an illustrated description of installation procedures and printing tests

Chapter 4
– Describes the disassembly/reassembly procedures necessary for printer servicing

Chapter 5
– Provides the planned maintenance procedures

Chapter 6
– Describes the firmware and firmware updating

Chapter 7
– Describes the troubleshooting procedures

Appendix A
– Provides a description of the printer accessories
This Manual is completed by a number of video clips, listed below, which can be accessed directly from within
the associated chapters. For this to be possible, the Service Manual and all the video clips must be copied to
the same folder.
Video clip
”Plastic layer bobbin and plastic layer settings”
Video clip “
Plastic layer
– hot-end group insertion”
Video clip
”Soft glue application method”
Video clip “
Nozzle-print plate calibration procedures
”
Video clip
“Y axis belt replacement ”
Video clip
”X axis belt replacement”
Video clip “
Pr
int plate calibration”
All the .gcode format files related to the tools and templates referred to in this Manual are available both on the
technical info site
www.olinet.biz and on the SD Card supplied with the printer.
PRE-REQUIREMENTS
The approach adopted to the various subjects covered in this manual presumes that the reader has previous
knowledge of similar products.
REFERENCES
Spare Parts Catalogue
– code Y117900-2
Product Support Plan
– code 808795-00
User Manual German version code 589802
Spanish version code 589701
French version code 589600
Italian version code 589303
English version code 589402
DISTRIBUTION: General
FIRST EDITION:
June 2016