Olivetti 3D S2, Руководство по обслуживанию

Страница: 40 / 112

3-18 Service Manual Y118040-3
To restart printing just press the jog dialer.
Figure 3-33 Restarting printing
NOTE: when printing is suspended, the high nozzle temperature may result in material continuing to
flow, resulting in distortions in the piece printed.
To cancel printing, access the menu and move to
Stop Print using the jog dialer, then confirm by pressing the
jog dialer. Printing is cancelled.
Figure 3-34 Stop print
Note that the hot-end group will remain frozen at the last position assumed before printing was cancelled. To
return it to its Home position you can either move it manually using the menu commands or execute a Homing
procedure.