OLiPower BRE-I-5K, Руководство пользователя

Страница: 57 / 62

57
·
Check the warning fault messages in the System Control Panel
message is displayed, record it before doing anything further.
·
Attempt the solution indicated in below table.
7.1 Troubleshooting
Mgr EEPROM Fault The manager eeprom is fault.
·
Disconnect PV, grid, and battery, then reconnect.
·
Or seek help from us, if not go back to normal state.
Meter Lost Fault The communication between meter and inverter is interrupted.
·
Check if the communication cable between meter and
inverter is correctly and well connected.
Dsp Lost Fault SCI communication fault
·
Disconnect solar power PV+, PY- and battery, reconnect
them.
·
Or seek help from us, if cannot go back to normal state.
BMS Volt Fault Battery voltage sensor error
·
Wait for 5 minutes, check again.
·
Or seek help from us, if not go back to normal state.
BMS Tepr Fault Battery temperature sensor error
·
Wait for 5 minutes, check again
·
Or seek help from us, if not go back to normal state.
BMSIN_COM Fault BMS internal communication fault.
·
Disconnect battery, check wiring between inverter and
battery , battery internal wiring then reconnect.
·
Or seek help from us, if not go back to normal state.
BMS Dcov Fault Battery input over voltage error
·
Wait for 5 minutes. check again.
·
Or seek help from us, if not go back to normal state.
BMS RV Fault Battery input transposition error
·
Wait for 5 minutes. check again.
·
Or seek help from us, if not go back to normal state.
BMS Relay Fault The battery relay is fault
·
Disconnect battery, then reconnect.
·
Or seek help from us, if not go back to normal state
BMS Cell Fault Battery cell error
·
Wait for 5 minutes, check again.