OLiPower BRE-I-5K, Руководство пользователя

Страница: 30 / 62

30
3. DRED
This application meets the requirements of local Australian grid code (AS/NZS
4777.2) which, among specific requirements for connection. calls for
compatibility with Demand Response Enabling Devices (DRED), The DRED is
under control of a local network operator and allows to put the inverter in one of
the Demand Response Modes (DRMs) defined by the standard:
·
DRM 0 Operate the disconnection device
Currently, it is mandatory to respond to DRM0, which allows the network manager to
remotely decouple the installation from the distribution network.
DRM PINS definition:
Pin
1 2 3 4 5 6 7 8
Function
N/A N/A N/A N/A +3.3V COM/DRM0 GND HND
5.8 Inverter manipulation
Start inverter after checking all below steps:
·
Check that the device is fixed well on the wall.
·
Make sure all the PV wiring and the AC wiring are completed.
·
Make sure the meter is connected well.
·
Make sure the battery is connected correctly.
·
Turn on the external AC, DC switch.
·
Turn on the DC switch to the 'ON' position.
·
Set sysswitch on the screen of the inverter to "Turn on'
Startup inverter:
·
Inverter will start automatically when the PV panel generate enough energy or
the battery is charged.
·
Check the status of LED and LCD screen, first LED should be green and the
LCD screen should display the main interface
·
If first LED is not green, please check the below:
 All the connections are right.
 All the external disconnect switches are closed.
 The DC switch of the inverter is in the " ON ' position.
·
Enter the setting interface.
·
Set the safety standard as page 42: Set the system time as page 41: PV
connection mode as page 41: Set the work mode as page 41: Set the