Oki C824 Скачать руководство пользователя страница 113

Страница: 113 / 188

- 113 -

6. Troubleshooting

• Check the following explanations, smartphone app and "FAQ" in the web site.

• If you cannot solve a problem with the following solutions, contact your dealer.

Problems on the Machine

Symptom

Cause

Solution

Reference

Nothing is displayed on the
display screen after turning
the machine on.

The power cord is
unplugged.

Turn the machine off, and
then plug in the power cord
firmly.

The power is out.

Check whether the power
is supplied to the outlet.

The machine does not
operate.

The power cord is not firmly
plugged in.

Plug in the power cord
firmly.

The machine is turned off.

Turn the machine on.

Turning On the Power

The auto-power off function
turns off the power.

Turn the machine on, or
disable the auto-power off
function.

Automatically Turning
the Machine Off (Auto
Power Off)

The printer froze.

Press and hold the power
switch of the printer for
over 5 seconds to force
stop the printer.

The power switch LED
lamp quickly flashes at
approximately 0.3-second
intervals.

A malfunction may occur in
the machine.

Unplug the power cord
immediately, and then
contact your dealer.

The output tray and front
cover cannot be closed.

The belt unit and image
drums are not properly
installed.

Remove the four image
drums and reinstall the belt
unit. If the blue locks on the
both sides of the belt unit
are not locked, the output
tray and front cover cannot
be closed.

Replacing the Belt
Unit

The machine does not start
printing.

An error is displayed.

Check the error code, and
then follow the on-screen
instructions.

Error Messages

A LAN cable or USB cable
is unplugged.

Plug in a LAN cable or USB
cable firmly.

Connecting to a
Computer

There may be a problem
with a LAN cable or USB
cable.

Use another LAN cable or
USB cable.

A LAN cable or USB cable
does not meet the
standard.

• Use a USB cable

compatible with this
printer.

• Use an Ethernet

10BASE-T/ 100BASE-TX
cable.

There may be a problem
with the print function.

Press the scroll button

select [Print Information] >
[Configuration], and print
out the configuration list to
check the printing
performance.

Test Printing from the
Printer

A communication protocol
is disabled.

Press the scroll button

several times, select
[Admin Setup] > [Network
Setup], and then enable
the communication
protocol that you are using.

A printer driver is not
selected.

Set the printer driver of the
machine as the default
printer.

The output port of the
printer driver is incorrect.

Specify the output port for
connecting a LAN cable or
USB cable.

Nothing is displayed on the
display screen.

The machine is in Sleep
mode.

Check the «POWER
SAVE» button flashes, and
then start the machine by
pressing the «POWER
SAVE» button.

Energy Saving
Function

Print data is not sent.

A LAN cable or USB cable
is damaged.

Connect a new cable.

The time-out period set on
the computer has elapsed.

Set a longer time-out
period.

Symptom

Cause

Solution

Reference

Содержание C824





























































































































































































Результаты поиска

Содержание C824

Отзывы:

Похожие инструкции для C824

Бренды по названию

Популярные бренды

Oki C824, Руководство пользователя

Результаты поиска

Содержание C824

Отзывы:

Похожие инструкции для C824

Бренды по названию

Популярные бренды